Clipsal C-Bus Manual de instrucciones descargar pdf (Pagina 88)

C-Bus™ Basic Programming 1250SM0904R10/09

C-Bus™ Products Training Course 10/2009

5) Take the Barcode Scanner, and scan the Barcode of each C-Bus unit.

The Barcode can be found on a sticker on the side of the Box. This

will automatically retrieve the:

 serial number

 unit type

 catalogue code

 next available unit address

Figure 58 - Adding a C-Bus unit by using the Barcode Scanner

6) Press the OK button, to add the unit to the database. Repeat this

process for all of the C-Bus units.

Opening a C-Bus Project/Network

Opening a C-Bus project or network allows the C-Bus Toolkit software to

physically connect to the PC Interface. This will allow the:

 physical C-Bus network to be scanned

 C-Bus units to be programmed.

Opening a C-Bus project or network is dependent on which node of the

Navigation tree is selected:

 If the C-Bus Project node of the Navigation tree is selected, by pressing

the Open All Networks button on the toolbar, each C-Bus network in the

selected project will open.

 If the C-Bus Network node of the Navigation tree is selected, by

pressing the Open Network button on the toolbar, the selected C-Bus

network will open.

NOTE: Before opening a C-Bus project or network, you must ensure that

the C-Bus network has the correct network connection details e.g. that this

project has a PC Interface at COM1 as its connection. This can be checked

and modified (if needed) by editing the network settings.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 147 148

Sin comentarios

Clipsal C-Bus Manual de instrucciones Pagina 88