Clipsal 5400/16CB Manual de usuario descargar pdf (Pagina 3)

C-BUS INTERFACE INSTALLATION

3 pin plug from C-Bus Interface

plugs into the RS232 socket on

the 5400/16CB board.

C-Bus Interface ﬁ ts in this left

hand slide rail position in the

5400/16CB housing.

RED wire from the C-Bus

Interface connects to any +12V

terminal on the 5400/16CB

board.

C-Bus Positive (Blue + Orange)

C-Bus Negative (Blue & White

+ Orange & White)

NETWORK BURDEN JUMPER

This jumper is supplied in the OFF

position and can be enabled if the C-Bus

Network Burden is required. (Further

information is available from Clipsal.)

CLIPSAL C-BUS INTERFACE

4 Wire Loom for connection to 5400/16CB

board.

C-BUS WIRING

Note that the Clipsal C-Bus interface does not require all the C-Bus wire pairs.

Remote On/Off is not used by the Clipsal C-Bus Interface.

1 2 3 4 5 6 7 8

Sin comentarios

Clipsal 5400/16CB Manual de usuario Pagina 3