Clipsal 56011 Especificaciones descargar pdf (Pagina 34)

Supervised Remote Power Supply

The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with

up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and

can report abnormal conditions back to an ELK-M1 Control over the RS-485 four (4) wire data bus. It

also features relay outputs for AC and Low Battery to allow “stand-alone” operation with other controls.

• M1 Control allows:

- Remote power reset of powered peripherals

- Data-bus supervision of AC and Battery status

• Stand-alone exibility

- Two (2) sets of DC outputs

- On-board relay to supervise battery status

- On-board relay to supervise AC status

• Master AC and Battery ON / OFF Power Switch

• Visual AC Power Indicator

• AC Input: 16.5VAC, 45VA (TRG1640 or equiv.)

• DC Output Voltage: 13.8 Volts D.C. +/- 5%

• Current Rating: 2.0 Amps

• Wattage: 30 Watts

• DC Output Protection: Auto Resetting PTC

• Rechargeable Battery Size: Max. 12 Ah

• Low Battery Cutoff Threshold: ~10 Volts.

• Load Regulation: + / - 2%

• Lifetime Limited Warranty

7 62158 10212 7

ELK-P212S

Low Battery Cutoff & Master Power Switch

Total power control for any 12V control panel or power supply. Disconnects battery if voltage falls below

10VDC as a result of extended AC power outage. Convenient On/Off switch for manual disconnect.

ELK-965

7 62158 00965 5

• Automatic Low Battery Cutoff Protects Battery

From Deep Discharge

• Installer Friendly - Small Compact Size

• Includes AC Wires & Battery Leads

• Lifetime Limited Warranty

• Works with most 12 Volt DC Control Panels

or power supplies

• AC Power Leads: 18 AWG, 18" Length

• Maximum Transformer Size: 18 VAC

• Battery Leads: 18 AWG, 18" Length

• Low Battery Cutoff Voltage: ~10VDC

SAVE with 20

Piece Bulk Packs

7 62158 10965 2

ELK-965B20

7 62158 00964 8

Master Power Switch

Only, 20 Piece Bulk Pack

ELK-964B20

6, 12, or 24VDC Power Supply Board

Trouble-free, general-purpose power supply/charger ideal for alarm, access control, and CCTV

applications. Features auto-resetting “fuseless” overload protection which eliminates costly service

calls to replace blown fuses.

• Auto-Resetting "fuseless" overload protection

• Selectable 6, 12, or 24VDC Output

• Visual AC & DC Power Indicators

• Built-in Surge Suppression

• Battery Charging Circuit

• Size: 3”W x 3” H x 1” D

• Lifetime Limited Warranty

• Output Current:

• 1.2 Amps @ 6V

• 1 Amp @ 12V

• .8 Amps @ 24V

• Input Transformer Requirements:

• 6V operation: 12 VAC Transformer

• 12V operation: 16.5 VAC (TRG1640)

• 24V operation: 24 VAC (TRG2440)

ELK-P624

7 62158 00624

Plug-in Switching DC Power Supply

All purpose 12 Volt DC Plug-In Switching Power Supply ideal for alarm, access control, and CCTV

applications. It plugs into a 120 Volt AC outlet and supplies 1.5 Amps of regulated 12VDC.

• Computer Grade Switching Power Supply

• Regulated 12VDC Output

• Slimline Design

• UL Listed

• RoHS Compliant

• Efciency Level: V

• Lifetime Limited Warranty

• DC Output Voltage: 12 Volts DC

• Current Rating: 1.5 Amps

• Six foot cord and 2.1mm x 5.5mm x 9mm

Power Plug (center positive)

• Color: Black

• Size: 3"H x 2"W x 1.75"D

ELK-P1216

7 62158 01216 7

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios

Clipsal 56011 Especificaciones Pagina 34

Comentarios a estos manuales