Clipsal 5502DAL Manual de usuario descargar pdf (Pagina 4)

4 of 12

5502DAL C-Bus DALI Gateway Installation Instructions

4.0 C-Bus Indicators

4.1 Unit/Comms Indicator

If the unit is powered and functional, the unit/comms indicator will be illuminated

and steady. During data transfer on the RS232 port the unit/comms indicator

will ﬂash.

C-Bus Group Address DALI Address

ON Power on and functional

Flashing Data exchange in progress

4.2 C-Bus Indicator

This indicator shows the status of the C-Bus network at this unit. If sufﬁcient

network voltage and a valid C-Bus clock signal are present then the “OK” signal

will be displayed (steady on). If a network is connected, which has more current

load than the power supplies can support, this indicator will ﬂash to show a

marginal network voltage. If there is no C-Bus network clock present this indicator

will not light.

C-Bus Group Address DALI Address

ON C-Bus network operational

Flashing Insufﬁcient power to support network

OFF No C-Bus clock present or insufﬁcient power

to support network or C-Bus not connected

(check terminations)

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Clipsal 5502DAL Manual de usuario Pagina 4